Kryptton GNSS Receiver empowered by a high precision inertial measurement unit (IMU) on Ultimate version, Kryptton GNSS receiver is a new generation of tilt survey GNSS receiver. This kind of calibration-free tilt compensation is immune to magnetic disturbances. Kryptton GNSS receiver gives a surveyor unprecedented flexibility and efficiency – holding the survey pole upright is no longer necessary. With an internal high-performance multi-constellation and multi-frequency GNSS board, the Kryptton GNSS Receiver can provide high accuracy and stable signal detection.
- Supports multiple constellations & frequencies: GPS, GLONASS, BeiDou, Galileo, SBAS, QZSS, GAGAN
- Supports 576 channels
- 410-470MHz UHF radio, 4G network, Wi-Fi, Bluetooth, NFC
- Tilt compensation without calibration, immune to magnetic disturbances
- 16GB/8GB internal storage
- Up to 16 hours working in 4G/3G/2G network and Rover radio mode
- IP67-rated dust-& waterproof enclosure, for reliability in harsh environmental conditions
Shipping Worldwide – Contact Us for Best Price
Kryptton Differential GPS GNSS Receiver
Kryptton GNSS Receiver’s built-in high-performance antenna can speed up the time to first fix (TTFF) and improve anti-jamming performance. With a Nano-SIM card inserted in Kryptton, it can access Internet, transmit and receive correction data through 4G/WiFi network. The built-in UHF radio module supports long distance communication. The built-in large capacity battery is detachable and can display power level. Two batteries support up to 16 hours of fieldwork in 4G/3G/2G network and Rover radio mode. Kryptton GNSS can be easily configured with 1.54 inch interactive screen on Ultimate and Advanced versions. The rugged housing protects the equipment from harsh environments.
The Kryptton TC20 Controller is a rugged smart phone with design of 4.3” touch screen and an alphanumerical keypad. Equipped with powerful processor, it is perfect to adapt with Kryptton Survey software. With professional IP67 rating, it is robust and reliable for harsh operating conditions.
Kryptton GNSS Receiver Technical Specifications:
Signal Tracking | |
|---|---|
| GNSS | GPS L1, L2, L5 GLONASS L1, L2 BeiDou B1, B2, B3 GALILEO E1, E5a, E5b QZSS L1, L2, L5 SBAS (EGNOS, WAAS, MSAS, GAGAN) L1C/A |
| Channels | 576 |
Positioning | |
| Single Point Positioning Accuracy (RMS) | |
| Horizontal | 1.5m |
| Vertical | 3.0m |
| DGPS Positioning Accuracy (RMS) | |
| Horizontal | 0.4m |
| Vertical | 0.8m |
| SBAS Differential Positioning Accuracy (RMS) | |
| Horizontal | 0.6m |
| Vertical | 1.2m |
| High-Precision Static (RMS) | |
| Horizontal | 3 mm + 0.1 ppm |
| Vertical | 3.5 mm + 0.4 ppm |
| Static & Fast Static (RMS) | |
| Horizontal | 3 mm + 0.5 ppm |
| Vertical | 5 mm + 0.5 ppm |
| Real Time Kinematic (RMS) | |
| Horizontal | 8 mm + 1 ppm |
| Vertical | 15 mm + 1 ppm |
| Post Processed Kinematic (RMS) | |
| Horizontal | 8 mm + 1 ppm |
| Vertical | 15 mm + 1 ppm |
| Network Real Time Kinematic (RMS) | |
| Horizontal | 8 mm + 0.5 ppm |
| Vertical | 15 mm + 0.5 ppm |
| Observation Accuracy (zenith direction) | |
| C/A Code | 15cm |
| P Code | 20cm |
| Carrier Phase | 1mm |
| Time To First Fix (TTFF) | |
| Cold Start | <35s |
| Warm Start | <10s |
| Re-acquisition | <1s |
| Tilt Compensation Accuracy (within 30° ) | ≤2cm *Available in Ultimate Version |
| Timing Accuracy (RMS) | 20ns |
| Velocity Accuracy (RMS) | 0.03m/s |
| Initialization (Typical) | <10s |
| Initialization Reliability | >99.9% |
System & Data | |
| Operating System | Linux |
| Storage | 8GB & 16GB internal |
| Data Format | CMR, CMR+, RTCM 2.X/3.X |
| Data output | RINEX, NMEA-0183, Binary |
| Data update rate | 20Hz |
Electrical | |
| Input Voltage | 9~28V DC |
| Power Consumption (Typical) | |
| Network or Radio receive mode | ≈ 5W |
| Radio transmit mode (0.5W) | ≈ 8W |
| Radiotransmit mode (1W) | ≈ 9W |
| Radiotransmit mode (2W) | ≈ 11W |
| Lithium Battery | 7.4V 6400mAh x2* *Kryptton GNSS uses one battery at a time, the other is a substitute. Each battery lasts up to 8 hours when Kryptton GNSS works in 4G/3G/2G network and Rover radio mode. Two batteries add up to 16 hours of continuous use. |
Communication | |
| Cellular | 4G LTE/TD-SCDMA/WCDMA/GPRS/GSM |
| Network protocols | Ntrip Client,Ntrip Server, Caster Service |
| WiFi | 802.11b/g |
| Bluetooth | 4.1 |
| Internal Radio | |
| RF transmit power | 0.5W/1W/2W |
| Frequency | 410MHz – 470MHz |
| Operating mode | Half-duplex |
| Channel spacing | 12.5KHz / 25KHz |
| Modulation type | GMSK, 4FSK |
| Air baud rate | 4800 / 9600 / 19200bps |
| Distance (Typical) | >5km |
| Radio protocols | TrimTalk450, TrimMark 3, South, Transparent, Satel |
| Wired communication | |
| USB OTG | USB 2.0 x1 |
| Serial ports | RS232 x1 |
| COM baud rate | up to 921600bps |
Physical | |
| Display | 1.54’’ OLED *Available in Advance & Ultimate Version. |
| Dimension | 157x157x103mm |
| Weight | ≈ 1.2kg (without battery) ≈ 1.4kg (with a battery) |
| Operating Temperature | -40℃ ~ +75℃ |
| Storage Temperature | -55℃ ~ +85℃ |
| Relative Humidity | 100% not condensed |
| Dust & Water Proof | IP67 |
| Pole drop onto concrete | 2m |
Download Kryptton GNSS Receiver Catalog
Kryptton GNSS Receiver – Built for the future
Contact us for Kryptton GNSS Receiver Price..
